Use automatic packaging machines FAQ
Publish：電子產(chǎn)品全自動(dòng)柔性組裝線(xiàn),深圳市豪林精密機(jī)械有限公司 Time：2013-12-25
Use automatic packaging machines for packaging can not only increase productivity, but also can reduce the labor intensity , especially larger enterprises , the production of automatic packaging machines simply can not do without . The program is basically filling packaging , wrapping and sealing , plus metering and stamping and so on. All the mechanical inevitably arise when using using fault , automatic packaging machine is no exception, in order not to affect the production, to be introduced on some of the following fault automatic packaging machines often appears and tells you relevant solutions.
First, the use of automatic packaging machines, heat shrink machine will appear slow or is not up to the required temperature , then first check each holding suck magnetic switch point is operating normally. As long as the line is in a phase state of the phenomenon has not passed , there will be raised above . If not, the reasons for the magnetic switch suck , go check the meter to see if the ohmic value of each phase and automatic packaging machinery is not the same, there is no problem in this regard , there may be short-circuited.
Second, sometimes the machine will appear in the film material shift work , this time to adjust the angle triangle . If it deviates from the upper end , the triangle can be adjusted according to clockwise , counterclockwise to adjust the direction and vice versa .
AHGU7CXB$G9(}NN81X(1).png)
